TM 5-6675-348-13&P
(7)
Remove Mainfall Slope Sensor Cable (15) from Mainfall Slope Sensor (16) and secure Mainfall
Slope Sensor Cable (15) to Connector Holder (17).
(8)
Remove two socket head screws (18) and Mainfall Sensor (16) located on right side of
130G Grader's gooseneck (19).
NOTE
Socket head screws are used to protect the threads of the Mainfall Slope Sensor Mounting
Plate.
(9)
Install two socket head screws (20) in Mainfall Slope Sensor Mounting Plate (21).
NOTE
Tag and mark all cables before
disconnecting.
Step (10) applies to both sides of the
machine. The right side is shown.
(10) Remove Connectors (22), (23), and (24),
two bolts (25), washers (26), and Remote
Box Mounting clamp (27) from Remote
Interface Box (28) located under
130G Grader's gooseneck (19).
(11) Install Connectors (22), (23), and (24) onto
Connector Holders (29), (30), and (31).
3-37
