TM 5-6675-348-13&P
(5)
Toggle right R/L switch (5) forward.
NOTE
Right green automatic indicator
will be illuminated in upper right
corner of Operator Interface Box.
Left red manual indicator should still
be illuminated in left-hand corner of
Operator Interface Box.
Automatic operation will now start.
If return pass is on same side of road
crown, toggle Mode switch to right.
The cross-slope-controlled side is now
left side and blade slope direction is automatically changed.
a.
General Information.
Automatic Elevation and Cross-Slope automatically controls both the elevation on the left side of
the blade and the cross-slope on the right side of blade.
Setting Up the Blade Pro Motor Grader Control System.
b.
(1)
Adjust blade (1) to desired roll.
(2)
Set OFF/ON/SET-UP switch (2) to ON
position.