TM 5-6675-348-13&P
NOTE
AVERAGING MAINFALL Sensor will
appear and flash for 5 seconds. The
system has now stored a second
reading for the Mainfall Slope Sensor.
Left Display
Right Display
AVERAGING
MAINFALL
(10) The Blade Pro Motor Grader Control
System is asking for verification that
new calibration values are to be used.
If new calibration values are not to be
used, press left Increase/Decrease
toggle switch (3) down and no change
will be made to previous calibration.
Left Display
Right Display
ACCEPT
CALIBRATE
NOTE
If new settings are to be used, press
left RESET button.
Left Display
Right Display
CALIBRATION
COMPLETE
(11) Press left RESET button (5) to exit
calibration.
Left Display
Right Display
EXIT
CALIBRATE
(12) Move OFF/ON/SET-UP switch (2) to
ON position.
3-28
