TM 5-6675-348-13&P
(7)
Press left RESET button (5) to
calibrate BLADE Sensor.
Left Display
Right Display
BLADE
POSITION
Do not disturb 130G Grader while
averaging sensors, or calibration will
not be correct.
NOTE
AVERAGING BLADE will appear and
flash for 5 seconds. The system has
now stored a second reading for the
Blade Slope Sensor.
Left Display
Right Display
AVERAGING
BLADE
(8)
Raise blade (12) and position
130G Grader (6) on wheel mark (7)
and wheel mark (13) made in previous
step. Place blade (12) firmly on ground
so that cylinders are not supporting
any weight. Cylinder rods (11) should
rotate freely.
(9)
Press left RESET button (5) to
calibrate Mainfall Slope Sensor.
Left Display
Right Display
MAINFALL
POSITION
3-27