TM 5-6675-348-13&P
(4)
Press left RESET button (5) to enter
FULL CALIBRATE.
Left Display
Right Display
INITIAL
POSITION
Do not disturb 130G Grader while
averaging sensors, or calibration will
not be correct.
NOTE
After pressing the left RESET button,
AVERAGING SENSORS will appear
and flash for 5 seconds. The system
has calibrated the Circle Rotation
Sensor and has stored the first reading
for the Blade Slope Sensor and the
Mainfall Slope Sensor.
(5)
Press left RESET button (5) to
calibrate initial position.
Left Display
Right Display
AVERAGING
SENSORS
(6)
Raise blade (12), turn 130G Grader (6)
180 degrees, and position blade (12) on
marks made in the previous step. Place
blade firmly on ground so that
Cylinder Rods (11) are not supporting
any weight. Cylinder Rods (11) should
rotate freely.
3-26
