TM 5-6675-348-13&P
(4)
Set ON/OFF/SET-UP Switch (2) to SETUP
position.
(5)
Toggle left Increase/Decrease (3) switch
down until TEST MODE is displayed in
left window and RESET is displayed in
right window.
(6)
Push Slope switch (4) right, while at the
same time pushing right RESET button (5)
in, and right Increase/Decrease switch (3)
down. INSTALL will be displayed in the
left window.
(7)
Toggle left Increase/Decrease switch (3)
down until SENSORS is displayed in left
window.
(8)
Press left RESET button (5). BLADE will
appear in left window.
3-23