TM 5-6675-348-13&P
Edit Data. This allows the Operator to set up
c.
the system and input dimensions of the
machine.
(1)
Enable Dual-Axis.
Selects whether the platform tilt sensor is
turned ON or OFF. If the sensor is off, the
mast-extension elevation to the
bucket-teeth elevation is not compensated
as the machine is pitched or rolled.
(2)
Disable Swing Sensor.
This feature is not available.
(3)
Enable Laser Mast.
Turns on the mast search and laser
receiver function.
(4)
Units.
This feature is for selecting metric (meters/
mm) or U.S. (feet/decimal or feet/inches)
display readouts. The selections are M, F/
D, or F/I.
(5)
Language.
This feature is not available.
(6)
Keypress Beep.
Keypress Beep turns the audible tone
feature ON/OFF. Select YES to turn on the
audible tone feedback each time a button
is pressed.
(7)
Enable Light Bar.
This feature is not available.
(8)
Serial Baud Rate.
This feature is not available.
4-66
