115. Clamp Ring, Contact Ring, Outer Vertical Axis,
b. Disassembly.
Refer to figure 65 and
disassemble the horizontal circle.
a. Removal.
c. Cleaning, Inspection, and Repair.
(1) Remove the inner vertical axis (par. 126).
(1) Clean all metal parts with an approved
cleaning solvent and dry thoroughly.
(2) Remove the horizontal clamp (par. 114).
(2) Clean all threaded surfaces with a brush
(3) Refer to figure 64 and remove the clamp
dipped in an approved cleaning solvent
ring, contact ring, outer vertical axis, and
horizontal circle.
Figure 64. Clamp ring, contact ring, outer vertical axis, and horizontal circle, removal and installation.
78
AGO 5078A