TM 5-6675-348-13&P
NOTE
To restore default cut slope of 0.00%,
simultaneously press Up and Down (↑↓)
buttons.
Slope #1 has now been set and
Bucket-ProTM System is under normal
operation. If only one slope is needed,
which is the case for most trench work,
begin excavating.
If you are doing multiple slopes, as
in canal work, and want to enter the
other two slopes in memory, press
Down button to set SLOPE #2.
Screen changes and a sign appears
in main elevation window at current
2> grade setting.
(8)
Repeat Steps (2) through (7), but set
SLOPE #2 (-66% in this example, or >66.0 as it
appears on display) in lower left corner
window. Repeat Steps (2) through (7) to enter a
value for SLOPE #3.
(9)
Under normal SLOPE operation, change
between SLOPE #1, SLOPE #2, and
SLOPE #3 by pressing Up and Down (↑↓)
buttons.
(10) Position bucket's teeth on canal
BENCHMARK stake.
(11) Press ENTER button to select SYSTEM
REFERENCING.
4-14
