TM 5-6675-348-13&P
CARC paint contains isocyanate (HDI), which is highly irritating to skin and
respiratory system. High concentrations of HDI can produce symptoms of itching and
reddening of skin, a burning sensation in throat and nose, and watering of the eyes. In
extreme concentrations, HDI can cause cough, shortness of breath, pain during
respiration, increased sputum production, and chest tightness. The following
precautions must be taken whenever using CARC paint:
ALWAYS use air line respirators when using CARC paint, unless air sampling shows
exposure to be below standards. Use chemical cartridge respirator if air sampling is
below standards.
DO NOT let skin or eyes come in contact with CARC paint. Always wear protective
equipment (gloves, ventilation mask, safety goggles, etc.).
DO NOT use CARC paint without adequate ventilation.
NEVER weld or cut CARC-coated materials.
DO NOT grind or sand painted equipment without high-efficiency air purifying
respirators in use.
BE AWARE of CARC paint exposure symptoms; symptoms can occur a few days after
initial exposure. Seek medical help immediately if symptoms are detected.
(167) Remove paint from hole (131) at rear of left side of Battery Box (125).
(168) Install Voltage Protection Cable (132), internal star-washer (133), flat washer (134), and nut (135)
through hole (131) in Battery Box (125).
(169) Tighten nut (135).
(170) Apply black spray paint to Diode connection (132).
(171) Install Voltage Protection Cable (132) on negative Battery Terminal (136) with nut (137).
(172) Loop all excess Voltage Protection Cable (132) in Battery Box (125).
3-114
