TM 5-6675-348-13&P
Hydraulic oil is slippery and can cause falls. To avoid injury, wipe up all spilled hydraulic oil
with rags.
Inspect all hoses, lines, and fittings for cracks, bends, nicks, dents, stripped threads, and
cuts. Replace all damaged parts.
NOTE
Tag and mark all hoses prior to removal.
Plug holes and cap fittings to prevent oil spills.
Cable tie as needed.
Do not tighten 90-degree fitting or T-fitting on Check Valve until all lines are installed.
(109) Remove Load Sense Line (37) from
fitting (83).
(110) Install T-fitting (82) to fitting (83).
(111) Install original Load Sense Line (37) to
T-fitting (82).
(112) Install new Load Sense Line (84) to
90-degree fitting (80).
(113) Tighten #6 ORS to JIC/SAE fitting (81)
T-fitting (82). Tighten T-fitting (82) to
fitting (83). Tighten original Load Sense
Line (37) to T-fitting (82). Tighten new
Load Sense Line (84) to 90-degree
fitting (80).
(114) Remove plug (85) from Stack Valve (86).
Retain plug (85) for future use.
3-103
