TM 5-6675-348-13&P
CONFIGURE FOR TRANSPORT.
a.
Before Transport.
Blade Pro Motor Grader Control System components are not designed to be air
dropped. Failure to comply may result in damage to equipment.
When transporting your 130G Grader(s) with Blade Pro Motor Grader Control System by ship, train, air, or
truck, perform the following procedure:
NOTE
Perform Step (1) if you have an Airborne or Air Mobile grader.
(1)
Disconnect the Main Power Cable (9) before sectionalizing your 130G Grader for transportation.
(2)
Remove all components listed below, except Circle Rotation Sensor, and store in their carrying
cases during shipment and transportation:
Tracer Sonic Grade
5.
1.
Operator Interface Box
Controller
2.
Remote Interface Box
6.
EM2E-24 Electric Mast
3.
Blade Slope Sensor
7.
R2S-S Laser Receiver
4.
Mainfall Slope Sensor
b.
After Transport.
(1)
Install all components removed and do a complete calibration of components (1) through (4),