CAUTION: MAKE CERTAIN THE AXIS AND TELESCOPE TUBE ARE WELL SUPPORTED BEFORE REMOVING
SCREWS.
EMC 6675-231-15/67
Figure 69. Telescope axis, removal and installation.
housing, vertical circle, and left side axis bearing.
(2) Install the telescope axis (par. 123).
e. Installation.
(3) Install the vertical circle illumination prism
(1) Refer to figure 70 and install the vertical
circle prism carrier, vertical circle housing,
(4) Install the collimation level and lever
vertical circle, and left side axis bearing.
assembly (par. 93).
AGO 6078A
84
