TM 5-6675-348-13&P
5-14. 1145-2 LASER TRANSMITTER, 1275 LASER RECEIVER, AND ELEVATING BASE AND
TRIPOD SYSTEM OPERATOR'S PMCS TABLE.
Table 5-1. 1145-2 LASER TRANSMITTER, 1275 LASER RECEIVER, AND ELEVATING BASE
AND TRIPOD SYSTEM OPERATOR'S PMCS (Before/After)
Location
Item to
Not Fully Mission
Item No.
Interval
Check/Service
Procedure
Capable If:
1
Before/After
Exterior 1145-2
Wipe dirt and dust from all
Laser Transmitter
metal components with a dry
cloth.
Inspect exterior of 1145-2 Laser
Exterior of 1145-2
Transmitter for damage or
Laser Transmitter is
cracks.
damaged or cracked.
Inspect windows for cracks,
Windows are cracked,
scratches, and dirt. Clean
scratched, or dirty.
windows with clean water and a
soft cloth.
Inspect bottom mounting plate
Bottom mounting
for dirt and debris.
plate is dirty.
Ensure grade adjustment knobs
Knobs will not rotate
for "Y" and "X" axes rotate
or adjust properly.
freely and function properly.
Ensure breather vent is free of
Breather vent is
dirt and debris.
plugged.
Ensure power/charge connector
Broken or bent pin is
is free of dirt and damage.
evident.
2
Before/After
Electrical Cables
Ensure electrical cables are not
Frayed, cracked, or
frayed, cracked, or exposed.
exposed wires are
evident.
3
Before/After
Elevating Base and
Check all screws, fasteners, and
Screws, fasteners, or
Tripod
legs.
legs are missing or
damaged.
4
Before/After
1275 Laser Receiver
Inspect 1275 Laser Receiver for
Exterior of 1275
cracks or any damage to
Laser Receiver is
exterior.
cracked or damaged.
5
Before/After
1275 Laser Receiver
Inspect Grade Rod for cracks or
Grade Rod is cracked
Grade Rod
damage.
or damaged.
