TM 5-6675-348-13&P
(84) Install cable ties 180 degrees apart on service loop.
(85) Using cable ties, secure service loop to existing John Deere service loop.
Cables must be placed in cable guide or damage to cables may result.
(86) Install Boom Sensor Cable (25), Arm
Sensor Cable (5), Encoder Cable (42),
and Mast Cable (94) in Cable
Guide (98).
(87) Close Cable Guide (98) with three
cable ties.
To prevent damage to cables, ensure
cables are routed clear of hose reel.
(88) Route Boom Sensor Cable (25), Arm
Sensor Cable (5), Encoder Cable (42),
and Mast Cable (94) through frame to
Hydraulic Compartment.
4-58