TM 5-6675-348-13&P
SWING REFERENCE.
This feature is not available.
DEADBAND is the tolerance spread for ON-GRADE indication on the Graphic Display. For close-tolerance
work, a smaller DEADBAND is required; for rough excavation, use a wider DEADBAND. While in
DEADBAND mode, three types of detector-alarm modes are also selectable.
(1)
Press MODE button to access MAIN MENU.
Point menu arrows to CUSTOMIZE using Up and Down (↑↓) buttons.
(2)
(3)
Press ENTER button to confirm selection.
Point menu arrows to DEADBAND using Up and Down (↑↓) buttons.
(4)
(5)
Press ENTER button to confirm selection.
(6)
Observe that DEADBAND window appears on screen.
Set DEADBAND using Up and Down (↑↓) buttons.
(7)
(8)
Press ENTER button to select that value.
(9)
Observe that window showing alarms appears on screen.
NOTE
After selecting DEADBAND value, ALARM SELECT window with four choices appears.
(10) Point menu arrows to choice you want using Up and Down (↑↓) buttons.
(11) Press ENTER button to confirm selection.
(12) To exit MAIN MENU, press Up and Down (↑↓) buttons to highlight EXIT and press ENTER
button, or press MODE button.
