TM 5-6675-348-13&P
GRADIO DISPLAY SYSTEM OPERATION
SECTION III.
a.
DR2 Display.
The color of the shrink tubing on
the antenna indicates the
frequency of the display and must
match in color with the heat shrink
tubing on the antenna of the RT2S
Laser Receiver. If the heat shrink
tubing does not match, the Gradio
Display System will not operate.
Two adjacent frequency systems
will/can cross-communicate. If
two adjacent frequencies cross-
communicate, the Gradio Display
System will not operate properly.
(1)
Attach DR2 Display (1) to mounting
bracket (2) with screw (3).
(2)
Connect Power Cable (4) to back of
DR2 Display (1).
(3)
Adjust DR2 Display bright/dim
switch (5) as needed.
b. RT2S Laser Receiver.
The color of the shrink tubing on the
display and must match in color with
the heat shrink tubing on the antenna
of the RT2S Laser Receiver. If the heat
shrink tubing does not match, the
Gradio Display System will not
operate.
(1)
Turn on RT2S Laser Receiver (6).
(2)
Slide RT2S Laser Receiver (6) over
MM2E Manual Mast (7).
(3)
Rotate RT2S Laser Receiver Knob (8)
clockwise to secure RT2S Laser
Receiver (6) to MM2E Manual
Mast (7).
