TM 5-6675-348-13&P
e.
Disassembly.
Elevating Base and Tripod Assembly is top-heavy when upright. When disassembling unit,
use an assistant, or damage to equipment may occur.
NOTE
All tripod legs are removed the same. Only one leg is shown.
(1)
Loosen leg clamps (7) and remove leg extensions (8) from tripod legs (9).
(2)
Return each leg extension (8) to stowed position and tighten leg clamps (7).
(3)
Remove wing nuts (1), washers (2), and mounting bolts (3) from tripod base (4) and tripod leg
mounting holes (5).
(4)
Remove tripod legs (9) from tripod base (4).
(5)
Install wing nuts (1), washers (2), and mounting bolts (3) on tripod base (4).
(6)
Tighten wing nuts (1).
5-25
