TM 5-6675-348-13&P
(12) Install three spacers (18) and bolts (19) on
Boom Sensor Mounting Ring (20).
(13) Install Boom Sensor (21) on Boom Sensor
Mounting Ring (20), with three flat
washers (22), lockwashers (23), and
nuts (24).
(14) Tighten nuts (24).
(15) Install Boom Sensor Cable (25) on Boom
Sensor (21).
(16) Remove two bolts (26), flat
washers (27), and Skid Plate (28) from
Arm (2); allow Hydraulic Valve (29) to
hang.
NOTE
Raise Boom for welding.
(17) Connect Battery and raise Boom
(TM 5-3805-280-10).
4-45