TM 5-6675-348-13&P
LOCATION AND DESCRIPTION OF MAJOR COMPONENTS.
NOTE
Bucket-ProTM System is equipped with a Dual-Axis Tilt Sensor to compensate for frame
pitching and rolling during operation. Dual-Axis Tilt Sensor must be allowed to reach
operating temperature to function accurately. Warm-up for Dual-Axis Tilt Sensor takes
approximately 10 minutes after Bucket-ProTM System is powered up.
REMOTE CONTROL BOX. Remote Control Box contains microprocessors and software of your
(1)
Bucket-ProTM System.
ANGLE SENSORS. Three Angle Sensors measure boom, stick, and bucket angles, and feed data to
(2)
Remote Control Box.
DUAL-AXIS TILT SENSOR. Dual-Axis Tilt Sensor constantly compensates for movements so that
(3)
displayed elevation and grade references remain set up as entered. Dual-Axis Tilt Sensor
constantly compensates for the EM2E-24 Electric Mast rocking out of plumb as the HYEX pitches
and rolls during digging cycle.
GRAPHIC DISPLAY. Graphic LCD display with five buttons interfaces with all Bucket-ProTM
(4)
System features and functions.
EM2E-24 ELECTRIC MAST. The EM2E-24 Electric Mast is a telescoping receiver mount driven by
(5)
an electric motor.
SHOCK MOUNT. Attaches to the Bucket-ProTM System and protects from vibration.
(6)
1145-2 TRANSMITTER LASER REFERENCE SYSTEM. (Not Shown) Bucket-ProTM System Laser
(7)
Reference System allows trenching over long distances without having to benchmark Bucket-ProTM
System each time HYEX is moved.
