TM 5-6675-348-13&P
(5) Use existing hole in Hood (6) for left side of
Display Mount hole (7). Right side hole
located 12 in. (30.5 cm) from right side of
Hood (6).
(6) Mark right side Display Mount (5) hole
on Hood (6).
(7) Center punch and drill 1/2-in. (13 mm)
hole (7) in Hood (6).
(8) Install Display Mount (5), Loop
Clamp (8), two bolts (9), Display Mount
Plate (10) to Hood (6).
(9) Leave approximately 12 in. (30.5 cm) of
Power Cable (11) past Loop Clamp (8).
(10) Tighten bolts (9).
(11) Attach Power Cable (11) to Connector
Holder (3).
2-28
