(3) Install the optical plumbing assembly
c. Reassembly and Installation.
(1) Refer to figure 10, callouts 8 through
(4) Install the leveling screws (para 42).
17, and reassemble and install the
lock plate on the base.
(5) Install the base plate (para 41).
(2) Install the circular level (para 44).
Section IV. TARGET ASSEMBLY REPAIR INSTRUCTIONS
49. Target Frame
48. General
a. Removal.
The target assembly consists of a target
(1) Refer to paragraph 27 and remove the
frame, a target level, a base with 3 feet for
target assembly from the tribrach.
clamping to the tribrach, a base sleeve, and a
bracket.
AGO 10139A