TM 10-4510-206-14
2-6.
UNPACKING THE BATH UNIT (CONTD)
a.
Unlatch lid (1) and remove from base (2).
b.
Unbuckle strap (3) and lift smoke stack (4) out of container.
c.
Remove water strainer (5) and fill vent assembly (6) by lifting out.
d.
Remove electrical cable assemblies (7) and hose assemblies (8).
e.
Loosen three screws (9) securing support brace (10) and lift mixing
valve (11) out.
Lift water pump (12) out.
f.
Unlatch and open lid (13) on container No. 2. Remove three wind
screens (14) and vinyl bag (14A).
g. Unbuckle two straps (15) and remove shower head assemblies (16) with
attached soap tray (17).
2-10
Change 4