2-7.
SETTING UP BATH UNIT (CONTD)
g. Connect female end of 7 1/2 foot 1 inch water hose (9) to water heater
(7) and male end of hose to HOT fitting (10) on mixing valve (11).
h.
Connect male end of 7 1/2 foot 1 inch hose (9) to water pump outlet (12)
and female end of hose to COLD fitting (13) of mixing valve (11).
i.
Erect shower stand (14) approximately 20 feet from mixing valve (11).
Connect sections of shower stand assembly using 7 1/2 foot 1 inch Water hose (9).
Install cap (15) on shower stand end connector.
j. Connect female end of 25 foot 1 inch water hose (16) to MIXED
(17) of mixing valve (11).
Connect male end of hose to female fitting
shower stand (14).
fitting
(18) of
k.
Install elbow (19) on water heater (7) with a slight turn to right to
seat pin in slot.
l.
Insert smoke stack and guard assembly (20) through bracket (21) onto
elbow (19).
m.
Tighten screw (22) on bracket (21) to secure smoke stack and guard
assembly (20).
.
2-13