TM 10-4510-206-14
2-6.
UNPACKING THE BATH UNIT (CONTD)
h.
Remove 1 inch hoses and 1 1/2 inch hose (18) from under shelf.
i.
Remove twelve shower head legs (19) from bottom of container.
NOTE
If 3/8-inch wrench is not available, contact
organizational maintenance to remove water heater crate.
j.
Serial numbers PBU100442 and subsequent are shipped with crated water
heaters.
Remove crate by removing the eight 3/8-inch bolts securing the two
sides of the crate to the skid.
Remove front panel , and slide rest of crate
off the skids.
Retain crate, bolts, and panel for re-use.
k.
Visually check for damage.
Change 4
2-10.1/(2-10.2 blank)