TM 5-6675-348-13&P
g.
Test
(1)
Press and hold left RESET button (1) to
enter self-test mode.
Left Display
Right Display
TEST MODE
<RESET
NOTE
All LED segments will be activated.
This checks for inactive segments.
All LEDs will be illuminated. This
checks for burned out LEDs.
When RESET button is released,
Operator Interface Box will show any
error codes that have occurred since
the last power up. Refer to Blade
Pro Motor Grader Control System
Troubleshooting Error Messages in
Section V.
(2)
Toggle the OFF/ON/SET-UP switch (2) to
ON position to begin normal operation.
3-59