TM 5-6665-202-13
(fig. 1-1) and slide the housing from the head-
(c) Replace a damaged or defective mod-
er assembly.
ule as necessary.
(b) Refer to figure 4-2, and remove the
(3) Installation.
modules.
(a) Refer to figure 42 and install the
(2) Cleaning and Inspection.
modules.
(a) Wipe the modules with a clean, dry,
cloth.
(b) Slide the housing over the chassis
(b) Inspect for cracks, breaks, corroded,
(fig. 5-1) and secure to the header with two
or bent contact pins.
snap fasteners at each side of the housing.
Figure 4-2. Modules, removal and installation.