4-14.
WATER HEATER MAINTENANCE PROCEDURES (CONT’D)
1.
Air Shutter Assembly (Cont’d)
5.
Place air band (9) over shutter (3) and secure with rivet (8),
spring (7), two washers (6) and cotter pin (5).
6.
Position air shutter assembly (3) on blower housing (4) and secure
with three capscrews (1) and three washers (2).
7.
Install fuel pump and filter assembly as in paragraph 4-14k, steps 8
and 9.
8.
Connect fuel lines as in paragraph 4-14h, steps 18 through 20, and
connect power cable.
4-124
