TM 10-4510-206-14
TO 40P1-6-2-1
5 - 7 .
REPAIR PROCEDURES ( CONT’D)
f .
Water Pump (Cont’d)
3 .
Remove two machine screws (7) holding vane plate (8) to intermedi-
a t e b r a c k e t ( 4 ) .
Remove vane plate.
4.
Unscrew and remove impeller jam nut (9) from motor shaft (10). Use
block of wood to hold impeller in place while removing nut.
5 .
Unscrew and remove impeller (11) from motor shaft (10).
NOTE
Tag and tie seal assembly (12) when removed.
6 .
Remove impeller shim set (13),
seal washer (14), and seal assembly
( 1 2 ) f r o m m o t o r s h a f t ( 1 0 ) .
5-32
