TM 1O-451O-2O6-14
TO 40P1-6-2-1
5-7. REPAIR PROCEDURES (CONT'D)
e. Mixing Valve Assembly (Cont'd)
11. Carefully insert ruler or pencil into motor bellows (25) and measure inserstion depth. If
depth is greater than 1 3/4 inches (44mm), replace motor.
NOTE
Motor bellows
bellows.
should offer firm resistance to rigid object inserted inside
12. Using 7/16-inch wrench, loosen and remove four motor housing machine bolts (26).
13. Remove motor housing (27) with O-ring (28) and lower body (29).
Change 6
5-25
