TM 10-4610-206-14
Section II.
OPERATOR TROUBLESHOOTING PROCEDURES
3-2.
GENERAL
This section contains troubleshooting information for locating and correcting
most of the operating troubles which may develop in your Bath Unit.
The
troubleshooting procedures are listed in table 3-1. The table lists the common
malfunctions which you may find during operation or maintenance of the Bath Unit
or its components.
You should perform the tests/inspections and corrective
actions in the order listed.
Each malfunction for an individual component, unit,
or system is followed by a list of tests or inspections which will help you
determine corrective actions to take.
3-3.
TROUBLESHOOTING PROCEDURE
The symptom index lists the common malfunctions which you may find during the
operation or maintenance of the Bath Unit.
Use the symptom index for quick
access to the troubleshooting procedures.
This manual cannot list all possible malfunctions that may occur, nor all tests
or inspections and corrective actions.
If a malfunction is not listed (except
where malfunction and cause are obvious) or is not corrected by listed corrective
action, notify your supervisor.
3-2