TM 10-4510-206-14
4-14.
WATER
HEATER
PROCEDURES
(C0NTD)
d.
Conduit, Electrical Fittings, and Wiring (Contd)
15.
To remove fitting from rigid conduit (14), use two wrenches to hold
nut (13) and fitting (18) and turn nut counterclockwise until
loose.
Slide fitting and nut off conduit.
16.
To assemble fitting and conduit, measure correct length of conduit
and cut end square with no jagged edge.
Bend conduit if necessary
to correct shape.
17.
Slide nut (13) and fitting (18) onto end of conduit (14) and
tighten nut (13) against fitting (18).
4-84