TM 10-4510-206-14
4-14.
WATER HEATER MAINTENANCE PROCEDURES (CONTD)
d.
Conduit, Electrical Fittings, and Wiring (Contd)
2.
To remove rigid conduit (3), tag and disconnect wires (4) in control
box (5) and remove nut (6).
3.
Remove inspection plate (7) and disconnect wires.
Loosen nut (8)
and slide conduit (3) out, pulling wires through conduit.
4.
Remove upper conduit (9) by removing inspection plate (10) and
disconnect wires.
Loosen nuts (11) on both ends of conduit and
slide conduit out, pulling wires through conduit.
4-80