TM 10-4510-206-14
4-13.
WATER PUMP ASSEMBLY MAINTENANCE PROCEDURES (CONTD)
e.
Water Pump and Motor.
The motor is an integral part of the water pump
making it necessary to replace both assemblies if a defect occurs to
either assembly.
Proceed as follows.
1.
Disconnect wires in motor power junction box (paragraph d).
2.
Disconnect conduit at motor power junction box (paragraph d).
3.
Remove inlet water strainer (paragraph a).
4.
Remove water outlet assembly (paragraph b).
5.
Remove four nuts (1) and four screws (2) and remove water pump
assembly from frame (3).
4-52